Mostrar el registro sencillo del ítem
Estudio de la programación manual del torno con control numérico FANUC OiT
dc.contributor.advisor | Acosta Horna, Juan Ely David | es_PE |
dc.contributor.author | Montenegro Rodriguez, Segundo Rafael | es_PE |
dc.date.accessioned | 2022-01-14T14:15:45Z | |
dc.date.available | 2022-01-14T14:15:45Z | |
dc.date.issued | 2022-01 | |
dc.identifier.uri | http://dspace.unitru.edu.pe/handle/UNITRU/18603 | |
dc.description.abstract | Esta investigación, tiene como objetivo realizar el estudio de la programación manual del torno con control numérico Fanuc 0it y familiarizarnos en el trabajo de CNC (control numérico computarizado), mediante uno de los muchos controles de programación. El controlador Fanuc 0iT está basado en partes como: Panel de introducción de datos, caracterizado por un teclado alfanumérico y teclas que permiten el desplazamiento; panel de control de mando, donde podemos hallar los modos de operación. Dicho programa a estudiar trabaja mediante el Software Nanjing Swansoft, el cual nos muestra un torno CNC virtual. Ante el inicio de una programación hay que tener en cuenta 3 puntos: Primero, tener una hoja de procesos u operación de mecanizado; segundo, ante la pieza a mecanizar realizar los cálculos necesarios para operar sin cometer algún error y tercero, elegir las herramientas adecuadas para trabajar. | es_PE |
dc.description.abstract | The purpose of this research is to study the manual programming of the Fanuc 0iT numerical control lathe and to familiarize ourselves with the CNC (computer numerical control) work, by means of one of the many programming controls. The Fanuc 0iT controller is based on parts such as: data entry panel, characterized by an alphanumeric keyboard and keys that allow scrolling; command control panel, where we can find the operating modes. This program to be studied works with Nanjing Swansoft software, which shows us a virtual CNC lathe. Before starting programming, 3 points must be taken into account: First, to have a process sheet or machining operation; second, before the part to be machined, to make the necessary calculations to operate without making any mistake and third, to choose the right tools to work with. Before the Fanuc 0it programming, we have the main functions: | es_PE |
dc.format | application/pdf | es_PE |
dc.language.iso | spa | es_PE |
dc.publisher | Universidad Nacional de Trujillo | es_PE |
dc.rights | info:eu-repo/semantics/openAccess | es_PE |
dc.rights.uri | http://creativecommons.org/licences/by-nc-sa/2.5/pe/ | es_PE |
dc.subject | Control numérico | es_PE |
dc.title | Estudio de la programación manual del torno con control numérico FANUC OiT | es_PE |
dc.type | info:eu-repo/semantics/bachelorThesis | es_PE |
thesis.degree.name | Ingeniero Mecánico | es_PE |
thesis.degree.discipline | Ingeniera Mecánica | es_PE |
thesis.degree.grantor | Universidad Nacional de Trujillo. Facultad de Ingeniería | es_PE |
dc.type.version | info:eu-repo/semantics/acceptedVersion | es_PE |
dc.publisher.country | PE | es_PE |
renati.advisor.dni | 18156999 | |
renati.advisor.orcid | https://orcid.org/0000-0001-5390-9857 | es_PE |
renati.author.dni | 74348471 | |
renati.type | http://purl.org/pe-repo/renati/type#tesis | es_PE |
renati.level | http://purl.org/pe-repo/renati/nivel#tituloProfesional | es_PE |
renati.discipline | 713046 | es_PE |
renati.juror | Azabache Vasquez, Eduardo | es_PE |
renati.juror | Acosta Horna, Juan | es_PE |
renati.juror | Pelaez Chavez, Victor Hugo | es_PE |
dc.subject.ocde | http://purl.org/pe-repo/ocde/ford#2.03.01 | es_PE |