Estudio de parámetros operativos en espesador de relaves para mejorar calidad de agua recuperada y efluentes en Minera El Brocal S.A.A.
No Thumbnail Available
Date
2021
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Nacional de Trujillo. Fondo Editorial
Abstract
En el presente trabajo de investigación se realizó el estudio de los principales parámetros de operación
en el espesador de relaves de Sociedad Minera El Brocal S.A.A., los cuales son: flujo y densidad de
afluentes y efluentes, preparación y dosificación de floculante, velocidad de arenamiento de los relaves
espesados, eficiencia de recuperación y calidad de agua clarificada. Un adecuado control de estos
parámetros de operación minimiza las paradas de la planta procesadora de minerales, ocasionadas por
una mala calidad de agua clarificada y arenamiento en la línea de descarga de relaves espesados.
Además, se asegura una disposición de relaves espesados de acuerdo a condiciones de diseño del
espesador. Se evaluó 4 tipos de floculantes aniónicos, facilitados por Sociedad Minera El Brocal S.A.A.,
dentro de los cuales se determinó que el floculante más efectivo para obtener, en el agua clarificada,
valores de turbidez menores a 30 NTU y con un tiempo de residencia máximo de 70 minutos en su
preparación, es el Magnafloc-338. Se determinó que la densidad de la mezcla de los relaves de Cu y PbZn, que ingresan al espesador, con valores de entre 1200.0 y 1350.0 g/L, no es una variable
representativa para evaluar la calidad de agua recuperada, al mantener la misma dosificación de
floculante. Así mismo, se determinó que se debe mantener un flujo mínimo de bombeo de relaves
espesados de 650 m3
/h para mantener una velocidad de descarga por encima de la velocidad de
arenamiento, cuyo valor es 2.75 m/s. Al terminar la presente investigación, se propone un balance de
materia utilizando la herramienta “Solver” de Excel 2016, con el cual se puede relacionar y evaluar los
principales parámetros de operación para mantenerlos dentro de los valores de diseño. Al mantener
estos parámetros dentro de los valores de diseño, utilizando el floculante aniónico Magnafloc-338, se
estima un ahorro anual en costo de floculante de entre 132.7 y 231.4 mil dólares y una disminución en
uso de agua fresca de 69,350 m3
/ año.
In this research work, the study of the main operating parameters in the tailings thickener of Sociedad
Minera El Brocal S.A.A. was carried out, which are: flow and density of tributaries and effluents,
preparation and dosage of flocculant, sandblasting speed of thickened tailings, recovery efficiency and
clarified water quality. Adequate control of these operating parameters minimizes downtime in the mineral
processing plant, caused by poor quality clarified water and sandblasting in the thickened tailings
discharge line. In addition, a thickened tailings disposal is ensured according to the design conditions of
the thickener. Four types of anionic flocculants were evaluated, provided by Sociedad Minera El Brocal
S.A.A., within which it was determined that the most effective flocculant to obtain, in clarified water,
turbidity values lower than 30 NTU and with a maximum residence time of 70 minutes to prepare, it is the
Magnafloc-338. It was determined that the density of the mixture of the Cu and Pb-Zn tailings that enter
the thickener, with values between 1200.0 and 1350.0 g / L, is not a representative variable to evaluate
the quality of the recovered water, by maintaining the same dosage of flocculant. Likewise, it was
determined that a minimum thickened tailing pumping flow of 650 m3 / h must be maintained to maintain
a discharge velocity above the sandblasting velocity, whose value is 2.75 m / s. At the end of the present
investigation, a material balance is proposed using the “Solver” tool in Excel 2016, with which the main
operating parameters can be related and evaluated to keep them within the design values. By keeping
these parameters within the design values, using Magnafloc-338 anionic flocculant, an annual savings in
flocculant cost of between 132.7 and 231.4 thousand dollars and a decrease in fresh water use of 69,350
m3 / year is estimated.
Description
Keywords
TECHNOLOGY::Relave, floculante, calidad de agua y espesador de relaves.