Diseño y fabricación de álabes de ventilador de flujo axial para aumentar la eficiencia en torre de enfriamiento Hamon – Sobelco
No Thumbnail Available
Date
2019
Authors
Vereau Rosas, Edson Walter
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Nacional de Trujillo
Abstract
En el presente trabajo se diseñó y fabricó álabes de ventilador de flujo axial
para aumentar la eficiencia de la torre de enfriamiento de marca Hamon –
Sobelco. Para ello se utilizó la teoría del perfil aerodinámico aislado y la teoría
del elemento de álabe, bajo las condiciones de flujo libre de vórtice. A partir
de estas teorías se dedujo las ecuaciones de diseño, se seleccionó el perfil
aerodinámico óptimo y se determinó las dimensiones. Luego se procedió a
modelar en un software de diseño CAD. La fabricación del prototipo se realiza
en base a los planos de cada sección obtenida en el modelado del álabe. En
la fabricación del molde y los productos se empleó Durante las pruebas de
funcionamiento de los álabes diseñados, el ángulo de posicionamiento
determinado en la punta del álabe fue de 22°, el caudal de aire medido llegó
a valores de 132 𝑚3⁄𝑠 ; y el valor de la eficiencia estática resultó en 53.74%.
Se concluyó que el caudal de aire que genera los álabes diseñados es 40%
mayor respecto a los originales. Además, la eficiencia estática aumentó
respecto al valor inicial de 34.78% correspondiente a los álabes originales.
Description
In the present work, axial flow fan blades were designed and manufactured to
increase the efficiency of the Hamon - Sobelco cooling tower. The Isolated
Airfoil Theory and the Blade Element Theory were used under free vortex flow
conditions. From these theories the design equations were derived, the optimal
aerodynamic profile was selected and the dimensions were determined. Then
we proceeded to model in CAD software. The manufacture of the prototype is
done based on the drawings of each section obtained in the modeling of the
blade. During the functional tests of the designed blades, the positioning angle
determined at the tip of the blade was 22°, the measured air flow reached
values of 132 𝑚3⁄𝑠; and the value of the static efficiency resulted in 53.74%.
It was concluded that the airflow generated by the designed blades is 40%
higher than the original blades. In addition, the static efficiency increased with
respect to the initial value of 34.78% corresponding to the original blades.
Keywords
ventilador axial, presión estática, eficiencia, diseño