Caracterización microestructural y de propiedades mecánicas en aceros de alta resistencia obtenidos por laminación en caliente y con tratamiento térmico de revenido
dc.contributor.advisor | Panta Mesones, Julio. | |
dc.contributor.author | Chávez Cabrera, Wileduar David | |
dc.contributor.author | Muñoz Castillo, Daniel Alejandro | |
dc.date.accessioned | 2017-09-27T16:41:03Z | |
dc.date.available | 2017-09-27T16:41:03Z | |
dc.date.issued | 2016-12 | |
dc.description | In this research the mechanical and microstructural characteristics of an experimental high-strength steel obtained by hot rolling, were studied, both in the raw state of controlled rolling and after tempering heat treatment at subcritical temperatures of 400° C, 500° C and 620° C. Hardness measurements and microstructural analysis in longitudinal and transverse to the rolling direction were made. The results showed a marked anisotropy with respect to hardness. Regarding the microstructure it was determined that the smaller grain size occurs at 620 ° C, corresponding with a higher hardness. Small amounts of martensite and bainite presents distributed irregularly shaped homogenized with heat treatments. | es_PE |
dc.description.abstract | En este trabajo de investigación se estudió las características mecánicas y microestructurales de un acero experimental de alta resistencia obtenido por laminación en caliente, tanto en estado bruto de laminación controlada y luego de tratamiento térmico de revenido a las temperaturas subcriticas de 400°C, 500°C y 620°C. Se hicieron mediciones de dureza y análisis microestructural en sentido longitudinal y transversal a la dirección de laminación. Los resultados mostraron una marcada anisotropía con respecto a la dureza. Con respecto a la microestructura se determinó que el menor tamaño de grano ocurre a 620°C, correspondiente con una mayor dureza. Este acero presenta pequeñas cantidades de martensita y bainita distribuidas de forma irregular que se homogeniza con los tratamientos térmicos, fases características de un acero de fase dual. | es_PE |
dc.description.uri | Tesis | es_PE |
dc.identifier.uri | https://hdl.handle.net/20.500.14414/8790 | |
dc.language.iso | spa | es_PE |
dc.publisher | Universidad Nacional de Trujillo | es_PE |
dc.relation.ispartofseries | Tmet 9280;9280 | |
dc.rights | info:eu-repo/semantics/openAccess | es_PE |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/2.5/pe/ | es_PE |
dc.source | Universidad Nacional de Trujillo | es_PE |
dc.source | Repositorio institucional - UNITRU | es_PE |
dc.subject | Propiedades Mecánicas en aceros de alta resistencias | es_PE |
dc.title | Caracterización microestructural y de propiedades mecánicas en aceros de alta resistencia obtenidos por laminación en caliente y con tratamiento térmico de revenido | es_PE |
dc.type | info:eu-repo/semantics/bachelorThesis | es_PE |
thesis.degree.discipline | Ingenieria | es_PE |
thesis.degree.grantor | Universidad Nacional de Trujillo. Facultad de Ingeniería | es_PE |
thesis.degree.level | Título Profesional | es_PE |
thesis.degree.name | Ingeniero Metalurgico | es_PE |
Files
Original bundle
1 - 1 of 1
No Thumbnail Available
- Name:
- Chávez Cabrera, Wileduar David Muñoz Castillo, Daniel Alejandro.pdf
- Size:
- 4.95 MB
- Format:
- Adobe Portable Document Format
- Description:
- Propiedades mecánicas en aceros de alta resistencia
License bundle
1 - 1 of 1
No Thumbnail Available
- Name:
- license.txt
- Size:
- 1.71 KB
- Format:
- Item-specific license agreed upon to submission
- Description: