Eficiencia mediante Extracción de Oro en Carbón Activado a diferentes Granulometrías por Fundición en Laboratorio Certimin SA Lima - 2022
No Thumbnail Available
Date
2024
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Nacional de Trujillo. Fondo Editorial
Abstract
El Trabajo de investigación se desarrolló en 3 áreas del laboratorio CERTIMIN SA cada una de ellas
desempeña una función importante, iniciaremos con la conminución del carbón a las granulometrías
deseadas y mencionadas anteriormente, esta etapa se desarrolló en el área de Preparación Mecánica
de Muestras, por ello se realizó pruebas de control granulométrico al estado inicial del carbón mineral,
posteriormente mediante el uso de máquinas pulverizadoras se reducen al tamaño deseado malla -
10, malla - 60, malla -100, malla -140, malla -200, todas estas granulometrías fueron verificadas con
tamices patrón. Inicialmente se cuenta con una solución patrón de 70 ppm de Au la cual se obtuvo a
través de pruebas metalúrgicas (lixiviación en botella), esta ingresa a las pilas que contienen el carbón
mineral a diferentes granulometrías según indicado líneas arriba, mediante esta prueba se determinó
qué granulometría es la más óptima para la recuperación Au en carbón activado y por ende la
eficiencia. Luego una vez obtenido el carbón mineral a las mallas requeridas, estos fueron tratados en
la planta piloto del área de Metalurgia para su posterior adsorción, para ello preliminarmente se ha
obtuvo una solución patrón de 70 ppm de Au, la cual ingreso por intermedio de una dosificación
controlada a cada una de las pilas con carbón a diferentes granulometrías. Una vez obtenido el carbón
activado con mineral de Au, la siguiente etapa fue un tratamiento por vía seca o fundición a fin de
determinar la recuperación del mineral de importancia en el área de Ensayos al Fuego, para ellos
utilizaremos hornos de fundición los cuales manejan un rango de temperatura de trabajo de 800 C y
1200 C. Este estudio tiene como fin optimizar el proceso de recuperación de Au en muestras tipo
carbón activado.
ABSTRACT
The research work was developed in 3 areas of the CERTIMIN SA laboratory, each of them plays an
important function, we will begin with the comminution of the coal to the desired granulometries
mentioned above, this stage was developed in the area of Mechanical Sample Preparation, for For
this, granulometric control tests were carried out on the initial state of the mineral coal, subsequently,
through the use of pulverizing machines, they were reduced to the desired size -10 mesh, -60 mesh,
-100 mesh, -140 mesh, -200 mesh, all these granulometries were verified with standard sieves.
Initially, there is a standard solution of 70 ppm Au which was obtained through metallurgical tests
(bottle leaching), this enters the piles that contain the mineral coal at different granulometries as
indicated above, through this test it was determined What granulometry is the most optimal for Au
recovery in activated carbon and therefore efficiency. Then, once the mineral coal had been obtained
to the required meshes, they were treated in the pilot plant of the Metallurgy area for subsequent
adsorption. For this, a standard solution of 70 ppm Au was preliminarily obtained, which was entered
through a controlled dosage to each of the piles with coal at different granulometries.Once the
activated carbon with Au ore was obtained, the next stage was a dry treatment or smelting in order
to determine the recovery of the mineral of importance in the Fire Testing area, for which we will use
smelting furnaces which handle a working temperature range of 800 C and 1200 C.This study aims
to optimize the Au recovery process in activated carbon-type samples
Description
Keywords
TECHNOLOGY::Carbón Activado, Granulometría, Recuperación, Eficiencia, Fundición, Calcinación, Copelación, Laboratorio Químico