Mejoramiento de la infraestructura hidráulica y las técnicas de aplicación de agua para riego de los Productores Agrícolas del Caserío Colpa Yanasarina, Distrito Huamachuco – Sánchez Carrión - La Libertad
No Thumbnail Available
Date
2017
Authors
Simón Urquiza, José Henrry
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Nacional de Trujillo
Abstract
Con proyecto denominado “MEJORAMIENTO DE LA INFRAESTRUCTURA HIDRÁULICA Y LAS TÉCNICAS DE APLICACIÓN DE AGUA PARA RIEGO DE LOS PRODUCTORES AGRÍCOLAS DEL CASERÍO COLPA YANASARINA, DISTRITO HUAMACHUCO – SÁNCHEZ CARRIÓN - LA LIBERTAD”, se tiene por objetivo Mejorar la infraestructura hidráulica del canal Colpa Yanasarina y las técnicas de aplicación de agua para riego del caserío Colpa Yanasarina, distrito de Huamachuco, la cual permitirá irrigar 32.8 hectáreas beneficiando a 32 familias directamente permitiendo así elevar la producción agrícola del caserío. El planteamiento hidráulico está conformado por un sistema de captación, conducción y de derivación. El sistema de captación lo conforma una bocatoma convencional diseñada para captar 0.030 m3/seg. de la quebrada Toganga. Se construirá de concreto fc=210kg/cm2. El sistema de conducción está conformado por el canal de derivación (2,100.00 m) dos laterales de 1° orden el cual llamaremos ramal N° 1 (200.00 m) y ramal N° 2 (1,155.00 m), serán de sección rectangular de (0.40x0.30) y (0.30x0.20) respectivamente, revestidos de concreto Fc: 175 Kg/cm2. El ramal N° 2 será entubado por ello se consideró tubería UF C-5 de 160 mm de diámetro. El canal constara de 26 tomas parcelarias ubicado con el criterio técnico para abastecer la mayor superficie de riego. Para el buen funcionamiento del canal es necesaria la construcción de diversas estructuras hidráulicas que permitan el pase del flujo del agua sobre el recorrido del canal. Estas estructuras son llamadas obras de arte. Se consideraron las siguientes: desarenador (1 unid.), reservorio (1 unid.), caída inclinada (3 unid.), 26 tomas parcelarias, alcantarilla (1unid.), muros de contención ( 15 m). Las técnicas de aplicación que usaremos son por gravedad (surcos) y tecnificado (aspersión).
Para realizar el proyecto se tomó en cuenta los parámetros que exige el Sistema Nacional de Inversión Pública, así mismo se hizo uso de las normas establecidas por La autoridad nacional del agua (ANA), datos estadísticos de la INEI; también se emplearon diferentes programas de ingeniería aplicada como son: AutoCAD, AutoCAD CIVIL 2016, S10 costos y presupuestos, H canales, etc.
Description
With a project called "IMPROVEMENT OF HYDRAULIC INFRASTRUCTURE AND WATER APPLICATION TECHNIQUES FOR IRRIGATION OF AGRICULTURAL PRODUCERS OF CASPAIO COLPA YANASARINA, HUAMACHUCO DISTRICT - SÁNCHEZ CARRIÓN - LA LIBERTAD", the objective is to improve the hydraulic infrastructure of the Colpa Yanasarina canal and The irrigation water application techniques of the Colpa Yanasarina hamlet, Huamachuco district, which will allow 32.8 hectares to be irrigated, benefiting 32 families directly, thus enabling the agricultural production of the farm to be increased. The hydraulic approach is made up of a pickup, drive and bypass system. The intake system is made up of a conventional nozzle designed to capture 0.030 m3 / sec. Of the Toganga Gorge. It will be constructed of concrete fc = 210kg / cm2. The system of conduction is conformed by the channel of derivation (2,100.00 m) two sides of 1st order which we will call branch N ° 1 (200.00 m) and branch N ° 2 (1,155.00 m), will be of rectangular section of (0.40x0 .30) and (0.30x0.20) respectively, coated with Fc concrete: 175 kg / cm2. The branch No. 2 will be tubed for that reason was considered UF C-5 pipe of 160 mm of diameter. The canal will consist of 26 plots of land located with the technical criterion to supply the largest irrigation area. For the proper functioning of the channel is necessary the construction of various hydraulic structures that allow the passage of water flow over the channel path. These structures are called works of art. The following were considered: demolition (1unid.), Reservoir (1 unit), sloping fall (3 units), 26 plots, sewer (1unid.), Retaining walls (15 m). The application techniques we will use are by gravity (grooves) and technified (spray). In order to carry out the project, the parameters required by the National Public Investment System were taken into account, as well as the standards established by the National Water Authority (ANA), statistical data of INEI; Also applied different programs of applied engineering such as: AutoCAD, AutoCAD CIVIL 2016, S10 costs and budgets, H channels, etc.
Keywords
Riego, Infraestructura, Mejoramiento