Geomecánica aplicada al diseño de malla de perforación en chimeneas para optimizar el proceso de perforación en la empresa MARSA
No Thumbnail Available
Date
2023-06
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Nacional de Trujillo
Abstract
El presente estudio de investigación tuvo como finalidad optimizar el proceso de
perforación y voladura mediante el diseño de malla de perforación de chimeneas de
2.40 m x 1.50 m empleando las consideraciones geomecánicas en la empresa
E.C.M Alfa S.A. La metodología que se empleo tuvo un diseño cuasi – experimental,
de tipo descriptivo, además por su condición fue aplicada.
Los resultados del estudio geomecánico influye positivamente en la disminución de
disparos deficientes en un 43.33 por ciento por la falta de evaluación geomecánico
después de cada disparo, además el nuevo diseño de la malla de perforación y
voladura reduce en un 43.57 por ciento los costos con respecto a la malla anterior
por implementar el estudio geomecánico en cada disparo. Por otro lado, después
de hacer el estudio se observó que el factor de carga lineal del 2022 con el 2021
disminuyó en 1.16 kg/m, dando un porcentaje de mejora del 11.93 por ciento, así
también, se observó un avance por mes de 55.68 m.
Finalmente se concluye que el costo por voladura deficiente promedio del año
2021(mayo, junio y julio) con respecto al año 2022(mayo, junio y julio) disminuye a
S/ 314.96. Esta operación se da por la suma de explosivo por recarga con los
explosivos por desquinche; puesto que la malla propuesta ayuda a tener más
disparos (voladura) con respecto a la malla que se trabajó sin estudio geomecánico
en 11.26% dando a entender que hay más disparos por ende hay más productividad
en la empresa E.C.M. Alfa S.A. – Marsa S.A.
Description
The purpose of this research study was to optimize the drilling and blasting
process through the design of the 2.40 m x 1.50 m chimney drilling mesh using
geomechanical considerations in the company E.C.M Alfa S.A. The methodology
used had a quasi-experimental design, of descriptive type, and because of its
condition, it was applied.
The results of the geomechanical study positively influence in the reduction of
deficient shots in a 43.33 percent due to the lack of geomechanical evaluation after
each shot, also the new design of the drilling and blasting mesh reduces in a 43.57
percent the costs with respect to the previous mesh by implementing the
geomechanical study in each shot. On the other hand, after carrying out the study it
was observed that the linear load factor of 2022 with 2021 decreased by 1.16 kg/m,
giving a percentage improvement of 11.93 percent, also, an advance per month of
55.68 m was observed.
Finally, it is concluded that the average cost per poor blasting of the year 2021
(May, June and July) with respect to the year 2022 (May, June and July) decreases
to S/ 314.96. This operation is given by the sum of explosive per recharge with
explosives per blasting; since the proposed mesh helps to have more shots
(blasting) with respect to the mesh that was worked without geomechanical study in
11.26% implying that there are more shots therefore there is more productivity in the
company E.C.M. Alfa S.A. - Marsa S.A.
The purpose of this research study was to optimize the drilling and blasting
process through the design of the 2.40 m x 1.50 m chimney drilling mesh using
geomechanical considerations in the company E.C.M Alfa S.A. The methodology
used had a quasi-experimental design, of descriptive type, and because of its
condition, it was applied.
Keywords
Diseño de malla de perforación en chimeneas para optimizar el proceso de perforación