Imfluencia del Compuesto Nanotecnologico EF-TABS en los Parámetros Energéticos Del Motor Kama Km178
No Thumbnail Available
Date
2017-12-14
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Universidad Nacional de Trujillo
Abstract
El presente trabajo tuvo como objetivo investigar la influencia del compuesto
nanotecnológico EF-TABS en los parámetros energéticos del motor KAMA KM178, en
los regímenes de variación de velocidad y carga, realizados en el laboratorio de
motores, banco de ensayo MEC. ENERG. 398-UNT.
Los resultados más resaltantes obtenidos tras ésta experimentación, fueron:
1. El consumo especifico de combustible (ge) del motor KAMA KM178 nos revela,
que al mezclarse Diésel B5 + EF-TABS, en la zona de trabajo 2520 – 3240 rpm
se observa una disminución de gasto de combustible 0.56%, trabajando a plena
carga.
2. El comportamiento de las temperaturas T motor, T de gases de escape, del motor
KAMA KM178 al mezclarse el Diésel B5 + EF-TABS en el régimen de zona de
trabajo 2520 – 3240 rpm obtenemos un nivel más bajo de temperatura. En
consecuencia, se incrementa el ciclo de vida del motor y sus componentes y hay
menos emisiones de gases contaminantes.
3. Disminuye el coeficiente de exceso de aire en el régimen de zona de trabajo
2520 – 3240 rpm del motor KAMA KM178, lo cual genera una mejor
combustión por haber una mejor mezcla aire – combustible.
4. El motor KAMA KM178 tiene una elasticidad de ɜ = 1,45, lo cual indica que una
ɜ < 3 el motor es poco elástico, por lo tanto entrega poca potencia a bajo
régimen de revoluciones.
Description
This study aimed to investigate the influence of the nanotechnology product EF-TABS
on the energy parameters of the engine KAMA KM178, in variable speed and load
regimes, realized in the laboratory of motors, test bench MEC. ENERG. 398-UNT.
The most outstanding results obtained from this experiment were:
1. The specific fuel consumption (ge) of the KAMA KM178 engine reveals that when
mixing Diesel B5 + EF-TABS, in the working area 2520 – 3240 rpm there is a
decrease in fuel consumption of 0.56%, working in full load.
2. The behavior of temperatures T. engine, T. exhaust gas, KAMA KM178 engine
when mixing the Diésel B5 + EF-TABS in the working zone regime 2520 -3240
rpm gives a lower level of temperature. As a result, the life cycle of the engine
and its components is increased and there are fewer emissions of pollutiing
gases.
3. Decreases the excess air coefficient un the working zone regime 2520 – 3240
rpm of the KAMA KM178 engine, which generates better combustion due to a
better air-fuel mixture.
4. The KAMA KM178 engine has an elasticity of ɜ = 1.45, which indicates that a
ɜ < 3 motor is not very elastic; therefore, it delivers low power a low revs.
Keywords
Nanotecnologia, parametros energeticos